 Plastic hollow floatation balls have the characteristics of good absorption effect and high purification effect. Plastic hollow floating balls have large gap rate, heat resistance, chemical corrosion resistance, low pressure and mass transmission unit height, high -end spots, sufficient in -speed contact, small proportion, and high quality efficiency. The use temperature in various media is 60-150 degrees Celsius. Plastic hollow floating balls have the characteristics of gravity and stability, overlapping side and side, and good coverage effect. The water storage tank and salt removal, largely reduce the loss of heat, reduce the pollution of carbon dioxide and oxygen in the air and the air in the air, protect the health of operators, achieve the effect of maintaining water quality, saving energy, and purifying the environment. It is suitable for the various horizontal acid storage tanks of the enterprise, the storage water tank and the salt removal of water treatment in the water treatment, which greatly reduces the acid mist, reduce the heat loss of heat, and the carbon dioxide and oxygen in the air to pollute the water quality. To achieve water quality, save energy, and purify the environment. |
Plastic Hollow Floatation Ball Processing Process
The polypropylene hollow floating ball has the characteristics of good absorption and high purification efficiency. It has the characteristics of large gap rate, heat resistance, chemical corrosion, pressure drop and mass transmission unit height, high point high points, sufficient contact of the steam liquid, small proportion, and high quality transmission efficiency. The use temperature in various media is 60-150 degrees Celsius. After measurement: Using this product under normal production can save about 0.6 kg/h, and the concentration of the harmful gas of the operating point is reduced to 0.4 mg/cubic meter meter. , Greatly below the standard of harmful gas emissions (15 mg/cubic meter).
In addition to polypropylene (PP), the plastic floating balls produced by our company also have polyethylene and enhanced polypropylene materials. Plastic hollow floating balls have the characteristics of good absorption and high purification efficiency. It has the characteristics of large gap rate, heat resistance, chemical corrosion, pressure drop and mass transmission unit height, high point high points, sufficient contact of the steam liquid, small proportion, and high quality transmission efficiency. The use temperature in various media is 60-150 degrees Celsius. After measurement: Using this product under normal production can save about 0.6 kg/h, and the concentration of the harmful gas of the operating point is reduced to 0.4 mg/cubic meter meter. , Greatly lower than the national standards (15 mg/cubic meter) with harmful gas emissions.
